MK Morse CSM948SC, 9" x 48 Tooth Metal Devil(tm) saw blade cuts through tough metals quickly and smoothly due to it's unique combination of manufacturing quality, metallurgy and blade configuration
TCG (Triple Chip Grind) Cutting Tip Configuration makes all tips strong since the load is shared between teeth, maximizing the resistance of each tooth to chipping
Blades with more teeth are used for finer cuts and to cut thinner materials
Blades for cutting steel have 0 degree rake
This configuration creates a stronger tooth with more carbide where the cut is being made
Blades for cutting softer aluminum and thinner metals have 7-degree rake
This creates a more forward cutting action
The Morse Metal Devil cuts through steel, iron and aluminum with minimal frictional drag
Consequently, the time savings are dramatic and important to anyone trying to get more done in less time
In laboratory tests, the Metal Devil cut through 6-inch by 1/4-inch thick steel plate in less than 12 seconds on the first 20 cuts
Cuts Metal Longer: The unique metallurgy of the carbide tips and hardened steel inner plate combined with the configuration of the teeth and manufacturing quality create a circular saw blade that makes more cuts in metal than other blades you attach to a circular saw
Tests cutting angle iron and steel plate showed that the Metal Devil can be expected to deliver long life performance on virtually any metal-cutting application
Its superior performance is that the Metal Devil cuts cool and therefore does not melt aluminum along the cut line
The unique metallurgy and tip geometry of the blade and cutting tips means that virtually no heat is transferred to the inner plate or the material being
Cool Cutting Means Safer Cutting: Imagine cutting through a piece of solid steel then immediately picking up the pieces by the cut edge
With the Metal Devil you can do it
Think of how much time you'll save without having to wait around for parts to cool before you pick them up
The Morse Metal Devil also minimizes the sparks generated when cutting
With limited sparking and cool cutting action, the chance of sparks smoldering in nearby materials or of being burnt when picking up a freshly cut part are eliminated
Cool Cutting Means Cleaner Edges
Cool cutting means that painted surfaces will not melt at the cut, leaving paint right to the edge
This is especially helpful when cutting prefabricated building materials such as metal roofing and siding