Milwaukee 48-20-5005 - 1" Thin Wall Core Bit
Milwaukee 48-20-5005 1" thin wall core bit is ideal for large holes where depth is relatively shallow
The Core Bit cuts a kerf only
Usable depth of 3"
Usable cutting depth is 3"
The inside core must be removed by the operator before deeper drilling can be accomplished
The Thin Wall construction is ideal for smaller hammers and newer concrete
A 7-1/2 inch extension is available to allow for the deeper holes to be drilled
The appropriate (dependant on the diameter) SDS Plus drive Shank must be used to drive the Core Bit
Use of Center Pin and Guide Plate is not recommended for positioning and starting a 1 inch hole
Thin Wall Core Bits are available from 1 inch to 6 inch diameters
See Thick Wall Core Bits for cured/seasoned concrete or use with larger hammers
Use with SDS core bit shank 48-03-3545 (8") or 48-03-3551 (12")
Tools-r-us in a factory authorized Milwaukee sales and service station
